Window replacement in Grand Prairie
Grand Prairie is ten minutes from our shop in Arlington, so it’s one of the cities we reach fastest to measure. Its 70s and 80s subdivisions have the same single-pane aluminum as the rest of Tarrant County.
We’re in Arlington, so Grand Prairie is close by: we can usually get out to measure the same week. The visit is free and commits you to nothing.
Six signs you can check today from your own living room
You don’t need anyone to come out to notice them. If two or more sound familiar, it’s worth having them measured.
The glass is hot to the touch
On a single-pane window the sun hits the glass directly and the heat passes into the room with nothing to slow it down. If you can’t keep your hand on it at midday, that’s the heat your AC is fighting.
They look fogged up from inside
If the window is double-pane and fog or droplets appear BETWEEN the two panes, the seal has failed. It no longer insulates, and cleaning it won’t help because the moisture is inside the glass.
Some rooms never cool down
Almost always the west-facing ones. The room takes afternoon sun through a window that blocks nothing, and the thermostat in the hallway never finds out.
They stick or don’t close right
An old aluminum frame warps over time. If you have to push to close it, or a gap is left, that’s where the cold air you already paid for is going out.
You hear everything from the street
Single-pane glass doesn’t cut noise. A properly installed double-pane won’t eliminate it, but it takes a good bite out of traffic and neighbor noise.
The electric bill doesn’t add up
If your August bill went past $250 or $300 and the AC is in good shape, it’s worth checking where the cold air is going before spending on anything else.
Roughly what it costs, before anyone comes out
Almost nobody publishes this and we think that’s wrong. You’d rather know the range now than lose an afternoon to a salesperson to find out at the end.
$750–$1,500
The price moves with the size of the opening, the type of glass, and how complicated the installation is. A standard bedroom window sits at the low end of the range; a large living-room slider at the high end.
$8,000–$25,000
Most homes around here have 10 to 12 windows. If the budget doesn’t cover all of them at once, you start with the west- and south-facing ones — the ones letting in the most heat — and finish later.
We offer financing with $0 down (subject to credit approval). On the quote we put the monthly payment right next to the total price, so you can compare it against what you’re overpaying on electricity.
See financingReference ranges for the Dallas–Fort Worth market, 2026. Source: Dallas–Fort Worth window replacement pricing guides, 2026. The price for your home is set in the quote.
What people ask us most
How much does it cost to replace the windows in my home?
In the Dallas–Fort Worth area, an installed window runs from $750 to $1,500 depending on size, glass type and how complicated the opening is. A whole home, which normally takes 10 to 12 windows, lands between $8,000 and $25,000. We give you the exact number for your home in the quote, free and with no obligation — we'd rather tell you the range up front than waste your time.
Do they really pay for themselves in energy savings?
It depends on your home, and anyone who promises you an exact number without seeing it is guessing. What can be said with data: in Texas, air conditioning accounts for 50% to 70% of the summer bill, and a single-pane window is one of the main places heat gets in. How much your bill drops depends on how many windows you replace, which way they face, and how the rest of the insulation is holding up. During the visit we explain what to expect in your specific case.
Do you offer financing?
Yes. We offer financing with $0 down, subject to credit approval. On the quote we show you the monthly payment options next to the total price, so you can compare it against what you’re currently overpaying on electricity.
How long does the installation take?
Most homes are finished in one or two days of work. The windows are made to fit your openings, so a few weeks usually pass between signing and installation while the order comes in. We give you the estimated date in writing from the quote.
Can I replace just a few windows?
Yes, and often that’s the sensible move. If the budget doesn’t cover the whole house, you start with the west- and south-facing ones, which take the most sun and where you’ll feel the difference most. You finish the rest whenever you want.
Do you serve Spanish-speaking customers?
Yes — it’s how we work. Alan, the owner, is the one who comes to your home to measure and quote, in English or Spanish. There’s no call center in between and no outside salesperson: you deal directly with the person who stands behind the work.
What kind of warranty is there?
The window carries the manufacturer’s warranty and we stand behind the installation. The exact terms come in writing with your quote — never verbally. If someone offers you a warranty and won’t put it on paper, be skeptical.
Do you charge for the quote?
No. The visit, the measuring and the estimate are free and carry no obligation. If the number doesn’t work for you, that’s fine — you keep the information and decide whenever you want.